Silvercrest SDL 300 C2, Operating Instructions Manual

Page: 11 / 90

SDL 300 C2 ■ 8
│ GB │ CY
Changing the batteries
As soon as the battery becomes low, the " " symbol
will be shown on the display
to remind you to
replace the battery soon. When " " appears
on the display , the battery is empty.
You should then replace the battery:
♦ Remove the cover of the battery compartment .
♦ Take out the empty battery, and replace it with
a new 1.5 V AAA/LR03 battery. Ensure that the
battery has the correct polarity.
♦ Close the battery compartment .
Error messages
- "OUTZero": There is already more than 30 g
weight in the spoon when the scale is switched
on. Remove the weight from the spoon and then
switch the appliance back on again.
- „UNSTable“: The appliance is not being
held stably/level while being switched on. Place the
appliance on a stable support/hold the appliance
level and still in your hand.
– The batteries are low. The batteries will need to
be replaced soon!
– The batteries are dead. Replace the
batteries!
- Overload! The material in the spoon is
heavier than the maximum allowed weight!
Remove some material from the spoon
!
Cleaning and care
ATTENTION! PROPERTY DAMAGE!
Do not use abrasive or chemical cleaning
materials. These will damage the surface of the
appliance!
♦ Clean the appliance with a damp cloth. For
stubborn soiling use a mild detergent on the
cloth.
NOTE
You can remove the spoon from the
spoon handle and clean it separately in
the dishwasher.
♦ Ensure that the appliance is properly dry before
re-using it.
IB_339182_SDL300C2_LB7.indb 8 14.02.20 10:51