Silvercrest SDL 300 C2, Operating Instructions Manual

Page: 10 / 90

SDL 300 C2
GB │ CY │
7 ■
♦ Remove the material from the spoon and
add the next portion of material to be weighed.
The weight of the new material is now added to
the previous weight on the display
and the
total weight is shown.
♦ You can repeat this procedure until you have
reached 3000 g in total weight. If 3000 g is
exceeded, the display
shows " ".
NOTE
► You cannot use the TARE function while you
are adding weights!
TARE function/measuring in a container
♦ If you want to weigh food in another container,
place the container in the spoon
first.
♦ Then press the ON/TARE button to reset the
display to zero.
♦ When you add the food to the container, only
the weight of the food itself will be displayed.
If you take the container with the food off the
spoon
, a negative value will be displayed.
♦ Now press the ON/TARE button again to
return to the normal weighing mode.
Measuring liquids
The scale in the spoon can be used for measuring
liquids (15–45 ml or 1–3 tablespoons).
However, due to optical displacement, differences
of up to 15% can occur.
Hold function (HOLD)
If you press the HOLD button while a weight is
being displayed, the weight display will be retained
even if you remove the contents from the spoon
.
If you then press the HOLD button again, you
will deactivate the hold function and the current
weight will be displayed again.
IB_339182_SDL300C2_LB7.indb 7 14.02.20 10:51