10 GB
7. Finish ironing, set the temperature con-
troller
|
17
to
MIN,
set the steam flow
rate controller
|
3
to
and pull out the
mains plug.
8. Allow the steam iron to cool down, and
pour off any remaining water from the
water tank
|
15
through the filling open-
ing in the water tank (under the lid
|
2
).
7.6 Steam jet function
The steam jet function requires a high tem-
perature. Select a temperature setting be-
tween
and
MAX.
For this purpose, the
water tank
|
15
must be at least one quarter
full. The steam flow rate controller
|
3
is locat-
ed to the left on the symbol
.
• Press the steam jet button while the
steam iron glides over the item of laun-
dry
|
4
.
• Wait a few seconds before you press
the steam jet button
|
4
again.
NOTE:
• For smoothing items of clothing that are
hanging up, you can use the steam jet
Button in a vertical position.
8. Cleaning
DANGER!
~
Pull the mains plug out of the wall socket
before you clean the steam iron.
~
Allow the device to cool down before
cleaning.
CAUTION:
~
Do not use any astringent or abrasive
cleaning agents.
Cleaning the device
• For cleaning the device, use a soft,
moistened cloth.
• Dirt can be removed from the sole
plate
|
20
using commercially available
cleaning agents for chrome, silver or
stainless steel.
• Residues that have melted on can be re-
moved by heating the steam iron up to
the
MAX
setting and then ironing an
old cotton cloth.
Self-cleaning
CAUTION:
~
Do not put vinegar, limescale remover
or any other additives into the water
tank
|
15
. Additives can damage the de-
vice.
If you use tap water, you should run the self-
cleaning cycle after every use. Otherwise
use the self-cleaning cycle at least twice per
month.
1. Fill the water tank
|
15
.
2. Place the steam iron in the stand
|
7
.
3. Connect the mains plug with the wall
socket.
4. Set the steam flow rate controller
|
3
to
and set the temperature control-
ler
|
17
to
MAX.
5. Wait until the temperature control
lamp
|
14
goes out.
6. The switch
|
11
is in the position . Pick
up the steam iron together with the
stand
|
7
.
7. While doing so, hold the device hori-
zontally over a heat-resistant household
dish.
8. Press the
|
18 SELF CLEAN
button and
hold it down. Limescale residues will now
be ejected with steam and hot water from
the steam outlet holes in the sole plate
|
20
.
Hold the button down until no more steam
or water emerges.
BB1$6B%XHJHOHLVHQB%ERRN6HLWH0RQWDJ$XJXVW
