Silvercrest Scanradio SR-1300, Manual

Page: 60 / 64

Scanradio SR-1300
60 - English
Setting the Alarm Clock
Verify that the clock displays the correct time. The
alarm time can only be set while the device is powered
off. If it is still powered on, power the device off by using
the volume control knob (7).
ƒ Press and hold the ARM button (9).
ƒ Then press the HOUR button (8) repeatedly to set
the hours of the alarm time. You can also keep the
HOUR button (8) pressed down to accelerate the
digit adjustment. To distinguish ante meridian
(morning) and post meridian (afternoon) time, "PM"
will display for post meridian clock hours.
ƒ Keep the ARM button (9) pressed. Then press the
MIN button (10) repeatedly to set the minutes of the
alarm time. You can also keep the MIN button (10)
pressed down to accelerate the digit adjustment.
ƒ Release the ARM button (9) after the alarm clock
has been set correctly.