Scanradio SR-1300
58 - English
Using the Device
Powering On and Adjusting the Volume
Rotate the volume adjustment knob (7) counter-
clockwise, to power the radio on. This will adjust the
audio volume at the same time. Turn the volume
adjustment knob counter-clockwise to increase the
sound volume, or turn it clockwise to lower the
volume.
Turning the volume adjustment knob clockwise as
far as it goes will power the device off.
Tuning a Radio Station
To be able to receive any radio stations,
the supplied headphones must be
connected to the headphones
receptacle. The cable of the headphones
is used as antenna.
Use the volume adjustment button (7) to set the
desired sound volume.
Press the SCAN button (2) to launch an automatic
station search. As soon as a station has been found,
the scan will stop and the radio programme can be
listened to.
To switch to a different station, press the SCAN
button (2) again. The next available station will be
searched for.
Summary of Contents for Scanradio SR-1300
