SBT 1.5 B1
■
12
│
GB
│
IE
│
NI
6) Place the rotating blades centred into the cutting head cover ,
so that the rotating blades rest against the cutting head cover .
7) Push the connecting piece into the cutting head housing . The
protruding spacer of the connecting piece must point towards
you (see fig. 1). Ensure that the indentations on the cutting head
cover slide into the catches on the inside of the cutting head
cover .
8) Push the connecting piece firmly downwards so that it clicks
into place and sits tightly.
9) Replace the shaving head
on the housing and turn the shaving
head
in the direction of the arrow
until the marking on
the shaving head
points to the marking on the housing.
10) Replace the protective cap
on the housing.
Storage
■
Always protect the shaving head
with the supplied protective
cap
.
■
Store the appliance in a dry and dust-free location.
Troubleshooting
The appliance is not working:
■
Replace the battery.
■
The appliance is defective. Contact the Customer Service department.
Not all hairs are plucked:
■
You are working too fast. Move the appliance over your skin slowly.
Summary of Contents for SBT 1.5 B1
Page 3: ......
Page 21: ...SBT 1 5 B1 18 GB IE NI ...
