SBT 1.5 B1
GB
│
IE
│
NI
│
9
■
■
Treat the skin with a peeling treatment or a massage glove before
shaving. This helps remove dead skin cells, prevents ingrowing
hairs and makes fine hair stand up. The appliance can cut the
hair better this way.
■
After shaving, treat the skin with a moisturising lotion or cream.
Ideally, use a cream containing aloe vera or camomile extracts to
soothe and nourish the skin.
Using the appliance
CAUTION – PROPERTY DAMAGE!
►
The appliance is not suitable for wet shaving.
1) Remove the protective cap
from the housing.
2) Push the On/Off switch
towards the I marking. The skin light
lights up.
3) Pull the skin taut with one hand.
4) Place the appliance perpendicular on the skin and move it over
the skin in circular movements without exerting any pressure.
5) When you have finished the treatment, push the On/Off switch
in the direction of the 0 marking to switch off the appliance. The
skin light
goes out.
6) Replace the protective cap
on the housing.
Cleaning and care
CAUTION – PROPERTY DAMAGE!
►
Never immerse the appliance in water or other liquids!
■
After each use, clean the shaving head
using the supplied
cleaning brush
to remove loose hairs.
■
Disinfect the shaving head
regularly by spraying and
cleaning it with disinfectant spray.
■
Wipe the housing with a damp cloth. If required, use some mild
detergent on the cloth. Ensure that the appliance is completely
dry before the next use.
Summary of Contents for SBT 1.5 B1
Page 3: ......
Page 21: ...SBT 1 5 B1 18 GB IE NI ...
