Silvercrest SBLF 5 A1, Operating Instructions And Safety Instructions

Page: 14 / 36

SBLF 5 A1 GB
│
IE
│
11 ■
NOTE
► The next time you turn on the device it will automatically connect to the last
Bluetooth
® playback device connected. If your
Bluetooth
® playback
device does not automatically reconnect to the device, you will have to re-
establish the connection to your
Bluetooth
® playback device manually.
A detailed description of how to do this can be found in the operating instruc-
tions for your
Bluetooth ®
playback device.
► If you use a smartphone as your
Bluetooth ®
playback device, the audio
playback will be paused when there is an incoming call. Acceptance/termina-
tion of the call is carried out via the smartphone. After finishing the call, the
playback will be automatically continued.
► Note that while in
Bluetooth ®
mode, you can also set the volume via the
Bluetooth
®
playback device.
► If the playback sounds distorted, reduce the volume on the
Bluetooth
®
playback device.
Troubleshooting
The following table will help you to identify and rectify minor malfunctions:
Faults Possible cause Remedy
The speaker will
not switch on.
The speaker’s battery is not
charged. Charge the speaker’s battery (see
section
Charging the speaker ).
The mains adapter is not con-
nected. Connect the mains adapter
to the speaker correctly.
The socket is not supplying any
power.
Check the house mains fuse.
No sound.
The volume on the speaker or the
playback device is set to minimum. Increase the volume on the speaker
or on the playback device.
Playback has not been started on
the playback device. Start playback on the playback
device.