Silvercrest SBLF 5 A1, Operating Instructions And Safety Instructions

Page: 13 / 36

SBLF 5 A1 ■ 10
│
GB
│
IE
Button Function
Activating pairing mode**
Play/pause
/
Previous/next track
/
Increase/decrease volume
*Button only responds if the light function is switched on.
**Button only responds if
Bluetooth ®
operation is switched on.
Bluetooth
® mode
To play audio files via
Bluetooth
® , the speaker must previously have been paired
with a compatible
Bluetooth
®
playback device.
♦ Switch on the speaker using the multifunction button .
♦ Press the button on the remote control or press and hold the multifunction
button for about 2 seconds to switch on the
Bluetooth
®
function. When the
Bluetooth
® function is switched on, the confirmation melody is played and the
bottom of the speaker flashes blue every second.
♦ Set up the
Bluetooth
® playback device so that it searches for other
Bluetooth
®
devices. A detailed description of how to do this can be found in the operating
instructions for your
Bluetooth
® playback device.
♦ Press the button on the remote control or press and hold the multifunction
button for about 3 seconds to switch the speaker into pairing mode.
The bottom of the speaker flashes blue every half second.
♦ Select
SBLF 5 A1
from the list of found devices in your
Bluetooth
® playback
device to pair the two devices. If pairing is successful, you will hear a short sequence
of beeps and bottom of the speaker lights up permanently blue.
♦ Start playback on the
Bluetooth ®
playback device.
♦ To end the
Bluetooth ®
connection, either deactivate the
Bluetooth ®
function on
the playback device or switch
Bluetooth ®
operation on the speaker off by
pressing the button on the remote control or hold down the multifunction button
down for about 2 seconds. When the
Bluetooth ®
function is terminated, there is
a descending series of tones.