GB
│
MT
│
49
■
SBDB 5 A1
Radio operation
You can receive DAB+ and FM radio stations with the radio .
You can store up to 20 preset DAB+ and FM radio stations each .
NOTE
►
The first time the device is started, it starts in DAB+ mode and the station
list of the available DAB+ radio stations is created automatically . The
display
1
now shows the message
Scanning... DAB
and the number of
found DAB+ radio stations .
DAB+ radio operation (DAB)
Automatic station scan with station storage (AMS)
The automatic station scan with station saving scans the entire frequency band
once and automatically saves the DAB+ radio stations found as a
station list
.
♦
This device must be switched on . If necessary, briefly press the button
2
to switch on the device .
♦
If necessary, briefly press the
SOURCE /
button
4
several times until the
DAB+ radio mode is shown on the display
1
.
♦
Briefly press the
ENTER / SCAN
button
3
to start the automatic
station scan with station saving . The display
1
now shows the message
Scanning... DAB
and the number of found stations . The scan progress is
displayed as a progress bar . The DAB+ radio stations found are automatically
stored in the station list . When the scan is finished, the first station in the
station list is automatically played back .
NOTE
►
An automatic station scan with station saving may overwrite an existing
station list .
Selecting stations
♦
Press the
TUNE+
9
or
TUNE−
button
8
to select a DAB+ radio station
from the station list . After approx . 2 seconds, the displayed station is
automatically played back . Alternatively, briefly press the
ENTER /
SCAN
button
3
to listen to the selected station .
Selecting stations manually
You can use the
Manual tune
function to adjust the signal strength (and, as such,
the reception quality) of a DAB+ radio station .
♦
Press the
INFO / MENU
button
0
for about 2 seconds to call up the
settings menu .
♦
If necessary, press the
TUNE+
9
or
TUNE–
button
8
several times until
Station scan
appears on the display
1
.
♦
Press the
ENTER / SCAN
button
3
to confirm the selection .