Silvercrest SAS 7.4 LI C1, Operating Instructions Manual

Page: 12 / 85

GB
│
9 ■ SAS 7.4 LI C1
Operation
CAUTION!
► The suction opening must always be open and may not be blocked. Block-
ages lead to overheating and damage to the motor.
NOTICES
► Make certain that the dust filter is always inserted before using the
appliance.
► When vacuuming liquid, do not exceed the MAX marking in dirt container
-
.
1) Remove the handheld vacuum cleaner from the wall bracket or, if you are
not using the wall bracket remove the barrel plug from the socket.
2) If required, place the appropriate nozzle in the suction opening.
The crevice tool and the wet suction nozzle are kept in the space-saving
accessory storage in the handle.
–
the crevice nozzle , to clean narrow and difficult to reach locations.
–
the wet suction nozzle to vacuum up liquids.
NOTE
► After you have vacuumed up liquids, immediately clean the dirt container
-
.
Otherwise, bacteria or mould will build up inside! Ensure that the dust filter
bag
is completely dry before using the appliance again.
3) To switch the appliance on, slide the on/off switch forwards. The charge
indicator lamp lights up green.
4) When you have finished using the appliance, slide the on/off switch to
the rear.
NOTE
► Place the handheld vacuum cleaner in the wall bracket and start the
charging process once the vacuum power has become noticeably weaker
and the charge indicator lamp
flashes green.
Cleaning
To achieve the best results, empty the dirt container - and clean the dust filter
after every use.
CAUTION! MATERIAL DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents. These could
damage the outer surfaces of the appliance.