33
GB
Liquid escapes at the
lid
34
of the blender
jug
5
Seal
33
has not been inserted
correctly.
Insert seal
33
correctly (see
“Cleaning, checking and replac-
ing seals” on page 29).
Seal
33
is defective.
Insert new seal
33
(see “Clean-
ing, checking and replacing seals”
on page 29).
No temperature can be
set.
A speed setting 4 - 10 was se-
lected.
Select speed setting 0 - 3 (see “Set-
ting the speed” on page 17)
Parts of the device are
discoloured.
Certain food or spices (e.g.
curry) may discolour plastic.
This is not a defect with the de-
vice
Remedy unnecessary, since not
harmful to health.
A speed setting ex-
ceeding 3 cannot be
selected.
A temperature has been set.
Set temperature to
0
.
The device stops after
15 minutes.
A speed setting 7 - 10 was se-
lected. At these speed set-
tings, the device will function
for a maximum of 15 minutes
without a pause.
Select speed setting 0 - 6 (see “Set-
ting the speed” on page 17).
When switching on,
the set time is automat-
ically set to
15:00
.
The lid
34
/ the deep
steamer basket
3
can-
not be opened.
The electronic lock is activated
(see “Automatic lock” on
page 14).
Stop the device and wait until the
LED
15
has gone out before
opening the lid
34
/ the deep
steamer basket
3
.
Did you try to open the
lid
34
/ the deep steamer
basket
3
while the LED
15
was lit?
Possibly, the electronic lock is
blocked.
Turn the lid
34
/ the deep steamer
basket
3
with both hands clock-
wise until it is completely closed
(see “Put on the lid of the blender
jug” on page 21) or (see “Prepa-
ration of the steamer inserts” on
page 24).
Malfunction
Cause
Remedy
GB_317553_MC_plus_GR_CY_.fm Seite 33 Donnerstag, 18. April 2019 9:12 09
