8
7
English
English
NOTE:
It is highly recommended to first read your mobile phone's user manual before doing so.
1. The headset must be powered off before initiating the pairing process. After that, press and
hold the S1 button for at least 5 seconds until the blue and red LED indicators on the headset
start flashing alternately.
2. Tell your mobile phone to scan for other Bluetooth devices.
3. Your mobile phone will show you now all devices it has discovered during the scanning
process. The Bluetooth headset will be listed as “BT headset” or even as an “unknown
device”. Please select the appropriate entry and confirm. Now your mobile phone will ask
you for a password/key to access the headset. Please enter "1234" and confirm once again.
After successful pairing, the red LED indicator on your headset will turn off and the blue
LED indicator will start flashing.
NOTE:
The factory default access key for your headset is "1234".
NOTE:
1. If the headset is not in pairing mode, your mobile phone will not be able to find it. Please
set the headset in pairing mode before letting your mobile phone scan for it.
2. If no successful pairing is established after approx. two minutes, the headset will automatically
power off, and the previous pairing (if any) will be revoked. You may need to repeat steps 1 to 3
until pairing succeeds
Making and Answering/Ending Calls
Once the headset is successfully paired with your phone, you can use it to make and receive
calls. The headset can be used with voice dialing if your phone supports this feature.
Making Calls
You can use the headset to make calls when it is paired successfully with your mobile phone.
1. Using voice dialing
– Press the S1 button, wait for a beep tone and say the name of the
person you want to call. Press the S1 button again to cancel voice dialing.
2. Using the phone keys
– Dial the number on the mobile phone as you usually do. Once the
call has been set up, the voice will be transmitted to your headset automatically.
3. Redial
– Press and hold the S2 button for 3 seconds to redial the last number you have called.
Answering and Ending Calls
1. When the headset is powered on and you are receiving a call, you will hear a musical beep
and the blue LED indicator on the headset will start flashing quickly.
a. Press the S1 button to answer the call.
b. Press and hold the S1 button for 3 seconds to reject the call.
c. If the headset is powered off, press and hold the S1 button for 3 seconds to turn it on and
answer the call. In this case, the headset will not ring while receiving an incoming call.
2. To end the call press and hold the S2 button for 3 seconds.
NOTE
:
Due to the varying designs of mobile phones, an auto-disconnect may happen even when the
headset is powered on. In this case, the headset will not ring when there is an incoming call.
Press the S1 button for 1 sec. to reconnect the headset with your mobile phone for an
incoming call.
Transferring Calls
Press and hold the S1 button for 3 seconds to transfer the call to your mobile phone (and
stop talking through the headset). To transfer the call back to the headset, press the S1 button
again.
Volume control
Adjust the headset volume by pressing the S1 (volume up) or S2 button (volume down).
Mute
Press the S1 and S2 buttons simultaneously to mute the microphone. Press the S1 and S2
buttons again simultaneously to disable the Mute function.
