10
9
English
English
IMPORTANT INFORMATION
Troubleshooting
1. The red LED indicator on the headset flashes.
The headset is low on battery. Charge the headset for 2 hours until the red LED indicator on
the adapter turns off.
2. The headset cannot be turned on after being charged for 20 minutes.
To turn on the headset, you need to charge the battery for 40 minutes or more.
However, it is highly recommended to fully charge the battery before use.
3. No indication of charging is shown.
If the headset battery is empty or the headset hasn't been used for a long time, it may take
several minutes till the LED indicator on the adapter shows the charging status with a solid
red light.
4. No sound connection between headset and other devices.
-
Make sure that the two devices have been paired.
-
Make sure that the headset is turned on.
-
Make sure that the two devices are within range.
-
Some Bluetooth mobile phones can support only one Bluetooth headset. Disconnection
may happen when there is more than one headset paired with your mobile phone.
Battery Information
New batteries
-
For first time use, plug the adapter into the headset and charge it for at least 4 hours until
the red indicator light turns off.
Battery care
-
Only qualified Service Centers are authorized to remove or replace the battery.
-
Use the battery at room temperature so it can develop its maximum performance.
-
The battery capacity may be reduced if operating in a cold environment.
-
When not using the headset for a long time, recharge it anyway every two months.
About Pairing
What is Pairing?
Pairing is a process of associating Bluetooth devices with one other. It will establish a
permanent, secure link between the devices and enable quick access to the services provided
without the need to enter any passkeys.
Bluetooth Passkey
Each Mini Bluetooth headset has the default passkey
1234
for pairing, which is stored in its
internal memory. You are usually required to enter the passkey
1234
in a pairing process with
a Bluetooth mobile phone.
Paired devices remain paired even when:
-
One of the devices is not powered on.
-
A service connection is interrupted or the service stopped.
-
One or both devices are rebooted.
Notes for Nokia Bluetooth phones
1. Set the headset as default authorized.
Please ensure that the headset is permitted by the phone to connect without authorization. To
set it as authorized, go to "Bluetooth" > "Paired devices" > select "BT Headset-F" > press
"Options" > select "Request conn. Authorization” > and select “No”.
2. Volume bar appears abnormally.
Due to the differing designs of mobile phones, some models (such as N6230, N6820) will
check the volume status whenever Bluetooth connection is building up. The volume bar may
appear while using the Bluetooth headset. Please skip it.
3. Losing connection accidentally on N6600.
The connection of the headset may be lost accidentally. Please re-connect it if the headset is
disconnected. To re-connect the headset with the mobile phone, press the S1 button of the
headset and wait for the connecting message.
