![background image](http://html.mh-extra.com/html/silvercrest/dgp1000/dgp1000_user-manual-and-service-information_386555020.webp)
English
18
Silvercrest DGP1000
Step 5: Connect the base unit
Connect the base unit to the computer to ..
•
enter notes in online mode which are then shown directly on the com-
puter screen.
•
upload notes onto the computer.
•
charge the internal rechargeable battery of the base unit.
Proceed as follows:
1. Connect the USB socket (B) on the base unit to a free USB socket of
your computer with the connection cable.
The following message then appears after a short time: "Found new
hardware ...".
The base unit of the digital pen is detected by your computer. It cannot be
used, however, until the "Note Manager" has been started.
Note:
The base unit is supplied with power by an internal rechargeable
battery which is charged through the USB interface. The battery is fully
charged when a battery symbol with three bars is shown on the display
(C).
If the base unit is not recognised, remove and reinsert the USB connector.
You can also try using a different USB socket on your PC.
Summary of Contents for DGP1000
