■
10
│
GB
│
CY
DB 1400 B2
Steam ironing
■
Set the steam control
to the desired steam setting.
The temperature control
must be set to at least the
setting. Otherwise
no steam will be produced.
NOTE
►
After steam ironing or when no more steam is needed, set the steam control
to the
position. Otherwise, water could drip from the sole of the iron
.
Ironing with steam blast
The steam blast function is especially suitable for smoothing difficult-to-reach
parts of a garment.
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button
.
Temporarily setting the steam iron down
CAUTION! RISK OF FIRE!
►
Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply.
1) Move the temperature control
to the “MIN” position.
2) Stand the steam iron only on the base
.
Taking the steam iron out of service
1) Remove the power plug from the mains power socket.
2) Empty the water tank and clean the sole of the iron
.
3) Place the cooled-down steam iron on the base
.
