■
8
│
GB
│
CY
DB 1400 B2
Filling the water tank
1) Put the iron down on the sole of the iron
.
2) Open the cover of the filler opening for the water tank
.
3) Using the measuring beaker, fill the water tank with water to the “Max” marking,
but no further.
4) Close the cover of the filler opening for the water tank
.
NOTE
If the mains water in your area is rated as hard, it is recommended that you
mix the mains water with some distilled water. Otherwise, the jets for the
steam blast function could calcify (become blocked) prematurely.
To extend the optimal steam blast function, mix mains water with distilled
water according to the table.
Water hardness
Ratio of distilled
water to mains
water
very soft/soft
0
medium
1:1
hard
2:1
very hard
3:1
Information about the level of hardness of water in your area can be
obtained from your local waterworks.
