- 50 -
5.
In the LCD display
q
you will see "TIMER X KEY" (X
stands for the desired timer). Now press the desired
device button
e
followed by the desired sequence of the
button commands.
6. By default, the timer commands are sent at intervals of 1
second. Since many devices react sluggishly, it is possible
that the sequences of the timer commands are sent to the
device too quickly. Then you have the option of program-
ming, before a button command, a pause of between 5
to 21 seconds. For this press, if necessary repeatedly, on
the MACRO button
i
. Below and to the right the LCD
display
q
shows the current pause length in seconds.
7.
Press the S button
r
to save your entry and to return to
the timer menu.
8. Procede in a similar manner in order to, if required,
programme the other timer memory slots also.
9.
With programmed event timer the LCD display
q
shows
the timer symbol „ ” on the right next to the time.
Tips:
1.
Per timer memory slot a maximum of 14 buttons can be
programmed. After entry of the 14th button the sequence
will be automatically saved and "FULL" is shown in the
LCD display
q
.
2. In this menu also the device will return to the standard dis-
play after approx. 15 seconds without an entry.
Delete Timer
You can delete a programmed sleep or event timer as follows:
1. Select the timer that you wish to delete (see chapter
Sleep-Timer/Event-Timer) and then press the OK button
l
.
In the LCD display
q
you will read „TIMER CLEAR“.
2. Press the OK button
l
. The LCD display
q
changes to
„CONFIRM CLEAR“.
3. Press the OK button
l
once again to delete the timer.
The LCD display
q
confirms the successful deletion with
the message „SUCCESS“.
Learn configuration
The Universal remote control (URC) can learn and save but
-
ton signals of an original remote control. If the URC does not
work after applying the programming methods already de-
scribed or cannot carry out all commands please attempt to
teach the URC with the help of the original remote control.
•
Use new batteries for the URC and the original remote
control.
•
Maintain a distance of at least one metre from other light
sources. The light sources could disrupt the infrared trans-
mission.
•
Place the URC and the original remote control at a dis-
tance of 20 to 50 mm from each other on an even surface
so that the infrared diodes
2)
are facing each other.
BDA_SFB 10.1 B2 - IAN-93436_gb.indd 50
12.11.2013 16:01:42
