- 48 -
3. In the LCD display
q
“TIME SETUP” appears. Press the
button
t
to switch to “PLAYBACK SETUP”. Confirm
with the OK button
l
.
4. With the
or
buttons
t
now select the device that
should respond to the URC when you use the playback
buttons
f
. Confirm with the OK button
l
.
5. If instead of a device you select “OFF” and confirm it with
the OK button
l
, you switch the direct operation off.
If
you select “RESET” and confirm with the OK button
l
you activate the pre-programmed default settings (DVD)
for this function.
6. The LCD display
q
shows “SUCCESS” and the selected
device can now be directly controlled using the playback
buttons
f
.
Setting the lock function
With the lock function you can block access to all configura-
tion menus.
1.
Hold down the S button
r
for a little longer than 3 sec-
onds.
2. With the
or
button
t
select „SYSTEM SETUP“ and
confirm with the OK button
l
.
3.
With the
or
button
t
select “LOCK SETUP and
confirm with the OK button
l
. The LCD display
q
shows
the current settings.
4.
With the
or
button
t
now select between „LOCK“
(Block) or „UNLOCK“ (Unblock).
5.
With the OK button
l
you save the setting. In the LCD
display
q
„LOCK SETUP“ then appears again.
System reset
With this function you can delete the assignment of all or in-
dividual device buttons.
1.
Hold down the S button
r
for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears.
2.
With the
or
button
t
select "SYSTEM SETUP" and
confirm with the OK button
l
.
3.
With the
or
button
t
select "SYSTEM RESET" and
confirm with the OK button
l
.
4. With the
or
buttons
t
you can now select the
desired function. To delete the assignments (Code) of all
device buttons
e
, as well as all data to macros, timer and
learned functions, select “ALL RESET” and confirm it with
the OK button
l
.
5. In the LCD display
q
there now appears “CONFIRM
RESET”. Confirm the deletion with the OK button
l
.
Then the LCD display
q
shows “SUCCESS RESET”. The
detailed information is now deleted and the menu is termi-
nated.
6. To delete only the assignments of individual device keys
e
,
select “MODE RESET” and then press the OK button
l
.
The LCD display
q
now shows MODE” and asks you to
BDA_SFB 10.1 B2 - IAN-93436_gb.indd 48
12.11.2013 16:01:41
