- 45 -
10. Then proceed as described in the preceding chapter
"Programming by manual code entry" and check to see
if the code with the next lowest number combination will
function.
Tips:
1.
While the code search is activated none of the buttons
will function apart from OK
l
and EXIT
y
.
2. If the automatic search has reached the end of the code
list it stops there. The display then returns to "SEARCH
CODE".
System configuration
Setting the time
The LCD display
q
shows you the time of day. You set this as
follows:
1.
Hold down the S button
r
for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears. If ap-
pox. 15 seconds passes without an entry the device exits
the menu and returns to the standard display.
2. With the
or
button
t
select "SYSTEM SETUP" and
confirm with the OK button
l
.
3.
In the LCD display
q
"TIME SETUP" appears. Confirm
with the OK button
l
.
The LCD display
q
now shows
"TIME" and the time format (
24 HR
) blinks.
4.
With the
or
button
t
you can switch to the other
time format (
12 HR
). After which the time display for the
time of day will show an “
AM
” or “
PM
” before the time.
„
AM
“ stands fpr “AM” = “ante meridium” (Morning, 0:00
o’clock midnight to 12:00 o’clock midday). „
PM
“ stands
for “PM” = “post meridium” (Afternoon and evening,
12:00 o’clock midday to 0:00 o’clock midnight). Press
the OK button
l
to confirm.
5.
Now the hour indicator blinks. With the
or
button
t
select the hour number for the present time of day and
press the OK button
l
.
6.
Now the minute indicator blinks. With the
or
button
t
select the minute number for the present time of day
and press the OK button
l
to save. The "TIME SETUP"
notice appears again.
7.
To exit this or the following menus press repeatedly the
EXIT button
y
until the standard display appears in the
LCD display
q
.
Setting the date
The LCD display
q
shows you the date when you press the S
button
r
. You set the date in this way:
1.
Hold down the S button
r
for a little longer than 3 sec-
onds. The notice "LANGUAGE SETUP" appears.
2.
With the
or
button
t
select "SYSTEM SETUP" and
confirm with the OK button
l
.
BDA_SFB 10.1 B2 - IAN-93436_gb.indd 45
12.11.2013 16:01:41
