83
SSMS 600 B3
GB
Wall mounting
2 plugs and 2 screws are supplied to enable the wall bracket
w
to be mounted.
WARNING RISK OF ELECTRIC SHOCK!
►
Before mounting the wall bracket
w
check whether there are any power
cables or pipes in the wall!
1) Mark the positions for the drill holes using the wall bracket
w
.
2) Bore the holes with a 6 mm drill.
3) Insert the dowels into the drill holes.
4) Position both the openings of the wall-holder
w
over the drill holes and then
fi x it tightly using both screws.
Cleaning
WARNING RISK OF ELECTRIC SHOCK!
►
Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
►
Under no circumstances may the motor unit
4
be cleaned by immersing
it in water or holding it under running water.
WARNING - RISK OF PHYSICAL INJURY!
►
To avoid injuries, exercise caution when handling the extremely sharp
blade
7
. Reassemble the liquidiser after use and cleaning to prevent injury
from the exposed blade. Keep the blade out of the reach of children.
WARNING - PROPERTY DAMAGE!
►
DO NOT clean the accessories of your hand blender in the dishwasher as
it may cause damage to them.
►
Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
IB_78371_SSMS600B3_LB1.indb 83
IB_78371_SSMS600B3_LB1.indb 83
27.08.12 16:40
27.08.12 16:40
