Silvercrest 58929, Operating Instructions Manual

Page: 9 / 14

7 GB
Cleaning appliance
• Use only a slightly damp, soft cloth to
clean the iron.
• Use standard cleaning products for
chrome, silver or stainless steel to
remove soiling from the soleplate
7 .
• Caked-on residues can be removed
by heating the steam iron up to
MAX
and ironing over an old cotton cloth.
Self-cleaning
CAUTION: Do not add vinegar,
descaler or other products to the
water tank
8 : They might damage
the appliance.
If you use tap water, you should carry out
the self-clean operation after every use.
Otherwise self-cleaning should be per-
formed at least twice a month.
1. Fill the water tank
8 .
2. Set the steam iron in a vertical posi-
tion.
3. Insert the power plug into a wall socket.
The pilot light 1 on the handle 2 lights
up.
4. Set the steam level controller 13 to
and the temperature controller 9
to MAX.
5. Wait until the temperature control lamp 5
is extinguished.
6. Hold the appliance horizontally over a
heat-proof kitchen bowl.
7. Press SELF CLEAN 10 and hold
down. Limescale residue is now
ejected with steam and hot water from
the steam openings in the soleplate
7 .
Hold the button down until steam or
hot water are no longer ejected.
8. Repeat steps 1. to 7. until there are no
more residues.
9. Unplug the appliance, allow it to cool
down and pour away any water left in
the tank.
6. Storage
DANGER: The steam iron should
be kept out of the reach of chil-
dren.
1. Set the temperature controller 9 to
MIN.
2. Leave to cool down.
3. Set the steam level controller
13 to
and pour out any remaining water
through the filler opening of the water
tank
8 .
4. Wind the power cord 4 up around the
back of the appliance, making sure it
is not too tight.
5. Store the steam iron in a vertical posi-
tion, not standing on the soleplate 7 .
7. Disposal
The symbol showing a
wheelie bin crossed
through indicates that the
product requires separate
refuse collection in the Eu-
ropean Union. This applies
to the product and all ac-
cessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste,
but must be taken to a collection point for
recycling electric and electronic applianc-
es. Recycling helps to reduce the con-
sumption of raw materials and protect the
environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental
regulations applicable in your country.
__RP58929_B6.book Seite 7 Freitag, 29. Oktober 2010 1:38 13