Silvercrest 377153 2110, Operating Instructions Manual

Page: 10 / 150

SDRB 1000 B1
GB
│
IE │
7 ■
CAUTION
► Always remove the plug
7
from the power
socket before filling the appliance! There is a
risk of electric shock!
♦ Remove the water tank
1
by sliding back the
release
4
of the water tank
1
until you can lift
the water tank
1
up . Grip the water tank
1
by the protruding gripping aids with your thumb
and index finger and lift it up vertically . The tem-
perature control
3
stays on the appliance and
is not removed along with the water tank .
♦ Open the filler opening
2
in the water tank
1
.
♦ Use the measuring cup
t
to fill the water tank
1
with water to the "Max" marking .
♦ Close the filler opening
2
in the water tank
1
.
Ensure that the collar in the filler opening
2
locks into the notch on the lid . This means that
the water tank
1
is properly closed .
♦ Replace the water tank
1
onto the appliance .
The water tank
1
must audibly click into the
release of the water tank
4
.
Attaching/removing the brush
extension
CAUTION
► Never remove or attach the brush extension
w
while the appliance is hot .
Risk of burns!
♦ To use the steam and brush functions, please at-
tach the brush extension
w
to the steam brush .
♦ To do this, push the brush extension
w
onto
the appliance along the guide aid until it is fully
attached . The release of the brush extension
q
must click into place audibly .
♦ To use the ironing function, please remove the
brush extension
w
from the steam brush .
♦ To do this, push the release
q
downwards and
pull the brush extension
w
off the appliance .
Steam brush function
♦ Attach the brush extension
w
to the appliance .
It must audibly click into the release of the brush
extension
q
.
♦ Insert the plug
7
into a properly installed and
grounded wall socket .
♦ To produce steam, set the temperature control
3
to ••• or higher . The heat-up indicator lamp
5
lights up . As soon as the selected temperature
has been reached, the heat-up indicator lamp
5
goes out .
NOTE
► To use the steam burst function, set the tem-
perature control
3
to ••• or higher .
Lower temperatures are insufficient for pro-
ducing a burst of steam .
♦ You can now produce a burst of steam by press-
ing the steam burst button
8
.
NOTE
► To produce the first burst of steam after heat-
ing the appliance, you may have to press the
steam burst button
8
several times in a row .
The appliance is now ready for use .
CAUTION
► The steam brush can be used with any piece
of clothing . Be careful when treating heat-
sensitive textiles such as synthetics, polyamide
or artificial silk . Before treating such materials,
first process a small test patch in an invisible
spot (inside of the seam) to ensure that the hot
steam does not damage the material . Do not
apply the hot ironing sole
0
to these materi-
als directly . Only use the steam burst function .