SDB 2400 F4
GB
│
MT
│
37
■
Ironing with steam blast
■
The steam blast function is especially suitable for smoothing difficult-to-reach
parts of a garment.
NOTE
►
The temperature regulator
8
must be turned to at least the setting range
. Otherwise no steam will be produced.
To generate the maximum quantity of steam, the temperature regulator
8
must be set to the highest level (MAX
).
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button
4
.
3) You can also use the steam blast function to smooth hanging textiles.
VERTICAL
Hold the iron vertically and press the steam blast button
4
.
Pausing operation of the steam iron
WARNING! RISK OF FIRE!
►
Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply.
1) Move the temperature regulator
8
to the "MIN" position.
2) Stand the steam iron only on the base
0
.
After use
■
Remove the plug from the mains power socket.
■
Empty the water tank and clean the sole of the iron
q
.
■
Place the cooled-down steam iron on the base
0
.
Drip-stop function
With conventional steam irons, water can drip from the sole of the iron
q
at low
temperatures. This iron however, possesses a new feature, the DRIP-STOP function
(
). At low temperatures, the iron automatically switches off the steam-
blast function. When this happens, you will hear a "CLICK". Then set a suitable
temperature with the temperature regulator
8
. As soon as this is reached, steam
production is resumed.
NOTE
►
Wait until the set temperature has been reached before pressing the steam
blast button
4
again. Otherwise, water could drip from the sole of the
iron.
Summary of Contents for 369500 2010
Page 3: ...M A X MAX M A X ...