Silvercrest 368340 2101, Operating Instructions Manual

Page: 98 / 144

GB
│
MT
│
95 ■ SHBR 560 B1
Handling and operation
ATTENTION! PROPERTY DAMAGE!
► While working with the appliance, make sure that the rotary brush
6
does
not get blocked by loose objects lying around on the floor or by carpet
edges. These can damage the rotary brush
6
and stop it from working
properly.
NOTE
► Before finishing the cleaning process, use the appliance approx. 15
seconds without adding cleaning solution. This prevents larger amounts of
water residue being left behind and gives you a better cleaning result.
► A small amount of water may remain on the floor after cleaning for func-
tional reasons. In this case, remove the remaining water from the floor with
a cloth.
Continuous spray function
The appliance has a continuous spray function that allows you to continuously
apply cleaning solution to the rotary brush
6
without having to hold down the
cleaning solution switch
t
:
Ƈ
Press the cleaning solution switch
t
twice briefly to activate the continuous
spray function.
Ƈ Press the cleaning solution switch
t
once again to deactivate the continuous
spray function.
Cleaning hard floors
Once the appliance is assembled and the fresh water tank
q
is filled with water
and cleaning solution:
Ƈ
Unwind the power cable
u
completely from the upper and lower cable retainers
z
/
p
. To unwind the power cable
u
quickly from the cable retainers
z
/
p
,
pull the upper cable retainer
z
out a little way and turn it downwards (see
fig. 12).
Ƈ
Insert the plug into the mains power socket.