Silvercrest 368340 2101, Operating Instructions Manual, Page: 105 / 144

■ 102
│
GB
│
MT
SHBR 560 B1
Self-cleaning function
The appliance has a self-cleaning function that allows you to automatically clean
the rotary brush
6
, the brush chamber in the foot section
3
and the suction
channel after use.
Ƈ Place the switched-off appliance on the storage tray
4
of the parking and
cleaning station (see fig. 31).
Ƈ Press the self-cleaning switch
o
(see fig. 32).
Fig. 31 Fig. 32
Ƈ
The following cleaning programme is started:
1. The rotary brush
6
is started for approx. 20 seconds and cleaning solution is
applied to the rotary brush
6
.
2. The rotary brush
6
turns and the vacuum function remains active for approx.
30 seconds while cleaning solution is applied to the rotary brush
6
.
3. The appliance will switch off automatically when the cleaning programme
completes.
Manual cleaning
For heavier soiling, it is necessary to manually clean the rotary brush
6
, the
splash guard
7
and the brush chamber in the foot section
3
of the appliance.
If this occurs, do the following:
Ƈ Make sure that the appliance is not plugged in.
Ƈ
Take hold of the top of the splash guard
7
by the edge of the handle (
PULL
)
and pull it forward to remove it from the foot section
3
(see fig. 33).