■
18
│
GB
│
IE
SLE 200 A1
Troubleshooting
This section contains important information on fault identification and rectifica-
tion.
Causes of malfunction and fault rectification
The following table will help you identify and rectify minor malfunctions:
Fault
Possible cause
Remedy
The appliance
will not switch
on.
The mains plug is not plugged in.
Insert the plug into the mains power
socket.
The mains socket is not supplying
any power.
Check the house mains fuse.
The appliance
stops occa-
sionally (the
fan switches
off).
The humidity of the room has
reached the desired level.
This is a normal feature of the
appliance.
The appliance
is producing
no or too little
condensate.
The ventilation openings are
dirty or covered.
Ensure that the air inlet and air
outlet openings are clean and
free of obstructions.
The room's windows and doors
are open.
Close the windows and doors.
The appliance is running in the
FAN
programme. Dehumidifica-
tion is not taking place.
Select the
DEHUMIDIFICATION
programme.
The ejected air
is warm.
Heat exchange process
This is a normal feature of the
appliance.
appears
on the dis-
play
w
.
Temperature sensor/humidity
sensor error
Contact the Customer Service
department.
appears
on the dis-
play
w
.
The water tank
6
is full.
Empty the water tank
6
.
The water tank
6
is not inserted
properly.
Insert the water tank
6
into the
appliance correctly.
NOTE
►
If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see section
Service
).
Summary of Contents for 367016 2010
Page 3: ...A B C ...
