GB
│
MT
│
59
■
SEMM 1470 A2
6) Clean the silver attachment and the milk nozzle
0
that you have removed
from the milk tank lid
4
along with the positioning lever
o
in warm water
with a little washing-up liquid. Rinse all parts afterwards with plenty of clean
water.
7) Afterwards, replace the silver attachment onto the milk nozzle
0
and set it
at the desired height (see section “Setting the milk nozzle”).
8) Push the milk nozzle
0
and the positioning lever
o
back into the milk tank
lid
4
and push the connector assembly all the way back into the appliance.
For thorough cleaning, the connecting plug can be removed from the milk tank
lid
4
:
1) Turn it towards the
symbol and pull it out.
2) Clean connecting plug with tap water.
Afterwards, dry it thoroughly.
3) Refit the connecting plug on the milk tank lid
4
by turning it towards the
symbol.
To clean the milk tank lid
4
thoroughly, proceed as follows:
1) Take off the milk tank lid
4
.
2) Remove the rubber cover from the milk tank lid
4
.
3) Turn the knob
5
clockwise until the marking on the knob
5
is pointing
downwards.
4) Allow fresh water to run through the openings while moving the milk tank
lid
4
gently from side to side.
IB_359628_SEMM1470A2_LB5.indb 59
06.07.2021 15:08:39
Summary of Contents for 359628 2101
Page 3: ...A t 0 9 8 7 2 1 z i u 6 5 4 3 B o C p a s d q w e r f ...
Page 37: ... 34 IT MT SEMM 1470 A2 ...
Page 71: ... 68 GB MT SEMM 1470 A2 ...
Page 105: ... 102 DE AT CH SEMM 1470 A2 ...
