Silvercrest 346692 2001, Operating Instructions Manual

Page: 90 / 128

SSH 600 A1
GB
│
MT
│
87 ■
Setting the heating/blower level
The fan heater has two combined heating/blowing levels.
♦ With the appliance switched on, press the SET button
6
once.
++
(high heating/blower level) appears on the display
3
.
♦ Press the button
4
or the button
5
to switch between the
high heating/blowing level (
++
) and the low heating/blowing
level (
//
).
Set heating time
The appliance has a timer that you can use to set the desired heating
time between 1 to 24 hours. Once this heating period is over, the
appliance automatically switches to standby mode.
♦ With the appliance switched on, press the SET button
6
twice.
(Continuous operation) flashes on the display
3
.
♦ Press the button
4
button repeatedly to increase the heating
duration in steps of 1 hour.
♦ Press the button
5
button repeatedly to reduce the heating
duration in steps of 1 hour.
NOTE
► After approx. 5 seconds without a button being pressed, the set
heating duration is accepted and the timer is activated.
► When the timer is activated, the display
3
switches every few
seconds between the set temperature and the heating duration
display.