Silvercrest 346692 2001, Operating Instructions Manual

Page: 88 / 128

SSH 600 A1
GB
│
MT
│
85 ■
Handling and operation
Switching the appliance on and off
♦ Plug the appliance into a suitable, easily accessible mains socket.
The operating LED
2
lights up red to show that the appliance is
in standby mode.
♦ Press the button
1
to turn on the fan heater. The factory
preset temperature (25° Celsius) appears on the display
3
.
♦ Press the button
1
again to switch the fan heater back into
standby mode. The display
3
goes out, while the operating
LED
2
remains lit up red. The fan runs on a while to cool the
appliance down.
♦ To switch off the appliance completely, disconnect it from the
mains power supply. To do this, remove it from the mains socket.
WARNING
► The fan heater gets very hot during use. Allow it to cool down
before you disconnect it from the mains socket. Touch the heater
only by the recessed grips
8
provided.