Silvercrest 345185 2004, Operating Instructions Manual

Page: 21 / 57

SND 3600 D3
GB
│
IE
│
NI
│ 17 ■
Colour and brightness settings
♦ Adjust the colours and brightness as required by clicking on the
“Color/Brightness adjustment” button (K) . A settings window
appears .
♦ Move the “Brightness” slider to set the brightness between
0 and 255 .
♦ Move the three “Color Balance” sliders to set the RGB values
between 0 and 255 .
♦ To reset to the default values, click on the “Default” button .
♦ To accept the new values and close the settings window, click on
the “Exit” button .
After use
♦ Remove the negative holder
5
by pushing it all the way through
the device .
♦ Remove the slide magazine
6
by pulling it back out of the
slot
4
on the right .
♦ Remove the USB cable
8
from the USB port on your computer
and the scanner .