Silvercrest 329835 1910, Operating Instructions Manual

Page: 99 / 134

■ 96
│
GB
│
MT
SHBR 560 A1
Manual cleaning
For heavier soiling, it is necessary to manually clean the rotary brush
6
, the
splash guard
7
and the brush chamber in the foot section
3
of the appliance.
If this occurs, do the following:
Ƈ Make sure that the appliance is not plugged in.
Ƈ
Take hold of the top of the splash guard
7
by the edge of the handle (
PULL
)
and pull it forward to remove it from the foot section
3
(see fig. 33).
Ƈ
Take hold of the bracket on the left side of the rotary brush
6
and pull it
upwards to remove the rotary brush from the foot section
3
(see fig. 34).
Fig. 33 Fig. 34
Ƈ Clean the splash guard
7
and the rotary brush
6
in hot running water (see
fig. 35).
Ƈ If the brush chamber is dirty, wipe it out with a damp cloth or rag (see fig. 36).
Fig. 35 Fig. 36
Ƈ Allow the rotary brush
6
and the splash guard
7
to dry completely before
fitting them back onto the appliance (see fig. 37).
Ƈ
You can also place the rotary brush
6
upright in the rotary brush holder
5
on
the parking and cleaning station for drying (see Figure 38).
IB_329835_SHBR560A1_LB5.indb 96 09.06.2020 14:01:51