GB
│
MT
│
101
■
SHBR 560 A1
Fault
Cause
Remedy
The appliance
does not
dispensing
enough clean-
ing solution.
The fresh water
tank
q
is empty.
Fill up the fresh water tank
q
(see section
Filling the fresh water tank
).
The fresh water
tank
q
is not closed
properly.
Take the fresh water tank
q
out of the
appliance and tighten the lid (see section
Filling the fresh water tank
).
The appliance is not
completely ready for
use.
Before each use, press and hold the cleaning
solution switch
t
for about 10 seconds to
add cleaning solution to the rotary brush
6
so that it is ready for use.
The cleaning solution
switch
t
is not
being pressed down
continuously.
Press and hold the cleaning solution switch
t
to continuously apply cleaning solution to
the rotary brush
6
.
The splash guard
7
is not fitted properly.
Fit the splash guard
7
properly (see section
Manual cleaning
).
The rotary
brush
6
is not
turning.
The rotary brush
6
is
not fitted properly.
Switch the appliance off and pull out the mains
plug.
Fit the rotary brush
6
properly onto the foot
section
3
(see section
Manual cleaning
).
The rotary brush
6
is
blocked.
Remove the plug from the mains power socket.
Remove the splash guard
7
and the rotary
brush
6
to clear the blockage.
Fit the rotary brush
6
and the splash guard
7
back onto the appliance (see section
Manual
cleaning
)
.
Insert the plug into a mains power socket and
switch on the appliance.
Water is leak-
ing from the
appliance.
The fresh water
tank
q
is not closed
properly.
Take the fresh water tank
q
out of the
appliance and tighten the lid (see section
Filling the fresh water tank
).
IB_329835_SHBR560A1_LB5.indb 101
09.06.2020 14:01:52
Summary of Contents for 329835 1910
Page 3: ...A B ...
