Silvercrest 329834 1907, Operating Instructions Manual

Page: 84 / 114

GB │ MT
│
81 ■
SST 40 A1
Cleaning and maintenance
WARNING
► Always disconnect the mains adapter l
from the mains socket. Pull the barrel
plug
k
out of the connecting socket
4
of the appliance.
CAUTION
► Do not use abrasive or aggressive cleaning materials.
These can damage the surface of the appliance!
NOTE
► The LED light i is maintenance-free. The LEDs cannot be replaced!
Emptying the dirt container and cleaning the filter
NOTE
► For the best vacuuming results, empty the dirt container
0
and clean the HEPA
filter
p
at regular intervals.
♦ Lift the release lever 9 and pull the dirt container 0 forwards off the appliance
(see fig. 13) at the same time.
♦ First remove the HEPA filter
p
and then the coarse filter
o
from the dirt contain-
er 0 (see fig. 14). Tap out both parts over a waste bin or similar. If necessary,
you can rinse the HEPA filter
p
in fresh water. Afterwards, let it dry out completely.
♦ Empty the dirt container 0 over a dustbin or similar.
♦ First insert the coarse filter
o
and then the dry HEPA filter
p
into the dirt
container 0 .
♦ Push the dirt container
0
into the motor unit
8
until it clicks into place
(see fig. 15).
1.
2.
2.
1.
Fig. 13 Fig. 14 Fig. 15
IB_329834_SST40A1_LB5.indb 81 24.09.2021 08:50:09