Silvercrest 329834 1907, Operating Instructions Manual

Page: 80 / 114

GB │ MT
│
77 ■
SST 40 A1
Operation
Using the appliance
CAUTION
► The suction opening must always be open and must not be blocked. Blockages
lead to overheating and damage to the motor.
► Do not vacuum shag pile carpets with the floor nozzle
r
. The rotary brush
u
can become tangled in the carpet and jam.
NOTE
► Make sure that the HEPA filter p and the coarse filter o are always inserted
before using the appliance.
► As soon as the suction power noticeably decreases and the last indicator
lamp
7 flashes green, connect the appliance to the mains adapter l .
♦ Slide the On/Off switch 1 to the required level (see section Adjusting the
suction power ). The indicator lamp 7 lights up green, the LED light i on the
floor nozzle
r
lights up and the rotary brush
u
starts turning.
♦ Move the floor nozzle r over the areas to be vacuumed. Hold the handle 2
so that the floor nozzle
r
slides flat over the floor.
♦ Slide the On/Off switch 1 to position 0 when you want to stop vacuuming.
The rotary brush
u
stops, the indicator lamp
7
and the LED light
i
go off.
Adjusting the suction power
Level 1
This level is suitable for simple cleaning work. The operating noise level is low.
The appliance will achieve the maximum runtime.
Level 2
This level is suitable for normal cleaning work. The appliance will achieve a medium
runtime.
Level 3
This level is suitable for demanding cleaning work. The appliance will achieve the
shortest runtime.
NOTE
► Always vacuum at level 3 when using additional accessories in order to achieve
optimum vacuuming results.
IB_329834_SST40A1_LB5.indb 77 24.09.2021 08:50:07