Silvercrest 322539 1901, Operating Instructions Manual

Page: 36 / 146

GB │ IE │ 33 ■ SKD 2300 D5
Set heating time
The appliance has a timer that you can use to set the desired heating time between 1 to
24 hours. Once this period is over, the appliance switches off automatically.
♦ Press the Timer button
17
or . Timer appears on the display
2
and the
preset heating time
18
of one hour flashes.
♦ While the hour display is flashing, press the arrow button
15
or
32
or the
arrow button
16
or
29
to display the hours of the heating time
18
.
♦ Press the Timer button
17
or to confirm the hours setting. The minutes flash
on the display
2
.
♦ While the minutes display is flashing, press the arrow button
15
or
32
or the
arrow button
16
or
29
, to set the minutes of the heating time
18
.
♦ Press the Timer button
17
or to confirm the minutes setting. The timer is
now activated and the set heating time
18
is counted down.
♦ To turn off the timer, press the Timer button
17
or until the
Timer
display
and the set heating time
18
on the display
2
go out.
Overheating protection
The appliance is fitted with a thermostat-controlled overheating protector. If the appli-
ance becomes too hot internally, the heating element switches off automatically. As
soon as the appliance has cooled down, the heating element switches back on.
WARNING
As a general rule, there is a reason for overheating! It can mean a
risk of fire!
► Check that the appliance can sufficiently dissipate the heat generated: Is the
appliance covered or is it too close to a wall or other obstacle? Is the fan
blocked?
► Check that neither the air inlet
5
nor the air outlet
3
is blocked and remove
the cause.
► If possible, eliminate the problem or contact the Service Hotline (see the chap-
ter
Service
).