Silvercrest 321581 1904, Operating Instructions Manual, Page: 46 / 242

GB
│
IE
│
43 ■ SEMM 1470 A1
Before first use
1) Clean the sieve holder , , the measuring spoon " , the espresso
sieves
/
, the drip grille , the drip tray , the tray for small cups
the milk tank , the milk tank lid , the water tank lid
0
and the water
tank
6
as described in the section “Cleaning and care”.
2) Place the appliance on a level and heat-resistant surface. Ensure that the
mains outlet is in easy reach.
3) Insert the drip tray and place the drip grille on it.
4) Insert the sieve holder
,
together with the espresso sieve (
/
or ) into
the appliance by inserting it at the “ ” marking on the appliance and
then turning it anticlockwise until the handle of the sieve holder , is
pointing to the “ ” symbol.
5) Insert the plug into a mains power socket.
NOTE
Remove the orange transport restraint from the bottom of the
water tank
6 !
6) Before first use, proceed as follows to clean the internal pipes:
–
fill the water tank
6
with water (approx. 200 ml), and also the milk
tank (approx. 100 ml).
–
Insert the water tank 6 and the milk tank in the appliance.
–
Place a large cup on the drip grille .
–
Set the milk nozzle so that the milk nozzle is pointing into the cup.
–
Switch the appliance on using the on/off switch
%
(position I). All the
control lamps begin to flash. As soon as all the lamps light up
permanently the appliance has heated up.
–
Press the “Large” cappuccino button . Wait until water stops
coming out of the espresso outlet - and all control lamps light up
permanently. Repeat this process 2x.
–
Switch the appliance off using the on/off switch
%
(position O).
–
Empty the remaining water from the water tank 6 and the milk tank .
NOTE
► You should also clean the appliance as described here after long periods
out of use.
The appliance is now ready for use.