GB│MT
│
39
■
SVM 3.7 A1
Function
Vacuum massage stimulates the tissue by the formation of negative pressure . The
layers of skin are not pressed together as in conventional kneading massage, but
instead pulled apart by the vacuum in the attachment .
In this way, deeper tissue layers can also be reached, while the blood and lymph
circulation can be stimulated effectively . This helps to improve the nutrient supply
to the skin as well as to detoxify the tissue .
Before first use
♦
Clean the appliance as described in the section
Cleaning
.
♦
Charge the appliance fully before using it for the first time:
–
Connect the mains adapter
7
to the connection
5
of the appliance
and plug the mains adapter
7
into a mains power socket .
The control lamp
4
lights up red during charging .
–
Allow the appliance to charge for
four
hours and then disconnect it from
the power supply if you do not wish to use it .
The appliance is now ready for use . Before starting, always read the
Use
section
to learn how to handle the appliance safely and avoid injuries .
NOTES
►
The control lamp
4
goes out as soon as the appliance is fully charged .
However, you should leave the appliance connected to the power supply
for the recommended time before the first use .
►
If the battery is discharged, the control lamp
4
will flash red . The ap-
pliance switches off after about 15 seconds . Plug the appliance into the
power supply and recharge it .
►
You can also use the appliance while it is charging . However, do not use it
during the first charging process .
Summary of Contents for 313165
Page 3: ......
