GB│MT
│
27
■
SDM 1500 D2
Handling and operation
This section provides you with important information on handling and using the
appliance .
Filling with water
CAUTION! PROPERTY DAMAGE!
►
Never operate the appliance without water in the water tank
8
!
The pump could overheat and be damaged!
►
Do not fill the water tank
8
with any cleaning agents or other additives .
1) Push the “Water tank” release button
9
upwards and simultaneously
remove the water tank
8
.
2) Turn the water tank
8
and unscrew the cap .
3) Fill the water tank
8
with tap water up to the MAX mark .
NOTE
If the mains water in your location is rated as hard, it is recommended
that you mix the mains water with some distilled water . Otherwise, the
jets for the steam blast function could calcify (become blocked)
prematurely .
To extend the optimal steam blast function, mix mains water with distilled
water according to the table:
Water hardness
Ratio of distilled
water to tap water
very soft/soft
0
medium
1:1
hard
2:1
very hard
3:1
The water hardness level can be queried at your local water works .
4) Attach and handtighten the clamp .
5) Turn the water tank
8
around again and place it back onto the main unit
3
:
First fit the lower part into the main unit
3
and then flip the top part into the
device . Push it firmly into place so that the water tank
8
audibly clicks into
place and sits firmly on the main unit
3
.
Summary of Contents for 312077
Page 3: ...C A B ...
