Silvercrest 312077, Operating Instructions Manual

Page: 29 / 58

■ 26
│
GB│MT
SDM 1500 D2
Disposal of packaging materials
The packaging protects the appliance from damage during carriage .
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable .
Returning the packaging to the material cycle conserves raw materials and reduc­
es the amount of waste that is generated . Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations .
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment
in the event of a warranty claim .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites .
Assembling the appliance
♦ Push the main unit
3
onto the connection nozzle
4
on the steam foot
5
and
press the main unit
3
down until the round catch clicks into place .
♦ Select the appropriate pad
6
/
o
for the surface being cleaned:
–
the blue pad
o
for carpets and sensitive surfaces, such as parquet flooring,
–
the white pad
6
for more robust surfaces, such as tiled floors .
♦ Attach a pad
6
from below onto the steam foot
5
.
NOTE
► If you intend to clean carpeting with the steam mop, fit the blue pad
o
and
place the steam foot
5
on the carpet ring
p
. Ensure that the carpet ring
unlocking aid
a
is in line with the connection nozzle
4
. Push the steam
foot
5
onto the carpet ring
p
so that it clicks audibly into place . This will
allow the blue pad
o
to glide over the carpet .
► To remove the carpet ring
p
, press your foot onto the carpet ring release
aid
a
and pull the steam foot
5
carefully off the carpet ring
p
.