SilverCrest SWDR 500 B1
66 - English
time zone for which you want to know the current time. After this, with each
press of the "DISPLAY" button (5) the selected time zone and the corresponding
time are displayed.
Please remember that the time zone is being displayed only. To set the time
zone, proceed as described in the "Setting the time zone" chapter.
9.6 The "MODE" button functions
While the device is powered off the "MODE" button (15) lets you access the
setting mode for different functions.
Press once
SDA (Special Date Alarm)
Press twice
NAP timer
Press 3 times
Stop watch
Press 4 times
RDS time synchronisation ON/OFF
In radio mode the "MODE" button (15) has the following functions:
Press once
To show and change the tuning mode
Press twice
FM:
To show and change the "MONO"
and "AUTO-ST" settings
SW:
Quick selection of the different short
wave bands
9.7 SDA (Special Date Alarm)
This function lets you program up to 10 yearly-recurring date alarms. The
procedure is as follows:
While the device is powered off, press the "MODE" button (15) once. The
display (6) reads "SDA". 01 (for the first SDA) and the associated date in
month.day
format flash. If the alarm is disabled, the "SDA" icon (25) will
also flash. While an SDA is enabled, the "SDA" icon (25) illuminates. In this
case, the "SDA" icon (25) is also shown in clock mode.
