10 GB/CY
Setup / First use
Place the product on a suitable, level
surface.
Open the lid
1
.
Pull the plug
2
from the soap refill
opening
3
.
Pour liquid soap into the soap tank.
Note:
During filling, note the "Max"
mark that is visible, if you look into the
soap tank. Never exceed the "Max"
mark when filling with soap! Otherwise,
the product may overflow (see Fig. A).
Note:
Pour in at least 70 ml of soap;
otherwise, the "Fill level" indicator
13
will flash.
Replace the plug
2
in the soap refill
opening
3
.
Remove the protective film from the
display
9
and close the lid
1
. The
product is now ready for use.
Display indicators
Note:
The display indicators are only visible
if the lid
1
is open.
The “Soap quantity” indicator
12
shows
the amount of soap dispensed for each
use.
The “Fill level” indicator
13
shows how
much soap remains in the soap tank.
The fewer bars are visible, the less soap
there is in the soap tank. If only one bar
remains the “Fill level” indicator
13
be-
gins to flash. Refill the soap tank.
Note:
Pour much soap in the soap tank
until the display stops flashing.
The “Battery” indicator
14
shows the
charge level of the batteries that have
been inserted. If only one bar remains
you should replace the batteries soon.
Using the product
Set the quantity of soap you want dis-
pensed for each use. Press the “+” button
10
or “-” button
11
repeatedly until the
desired setting is displayed. You can se-
lect from four soap quantities. The more
drops displayed in the “Soap quantity”
indicator
12
, the more soap is dispensed.
Hold your hand underneath the soap
outlet
8
. The product starts dispensing
soap.
As soon as dispensing stops, you can
withdraw your hand.
Note:
The soap dispensing also stops
as soon as you withdraw your hand. This
is true even if the programmed quantity
has not yet been dispensed.
If you do not intend to use the product
for long periods, press the “-” button
11
repeatedly until “OFF” appears in the
display
9
.
Press the “+” button
10
to turn the product
back on.
Note:
If you need to remove a large
quantity of soap from the soap tank, you
can let the soap dispensing run for 30
seconds: Press the „+“ button
10
and
the „-“ button
11
simultaneously and
hold them for about three seconds. The
product begins dispensing soap and stops
after 30 seconds.
Note:
If you have not used the product
for several days, you may have to activate
the soap dispensing function several
times in a row before soap is dispensed
again.
Summary of Contents for 301634
Page 3: ...A 1 2 5 B 3 4 6 7 8 9 10 11 C 4 14 13 12 ...
Page 4: ......
