27
GB/IE/NI
The bar chart on the display and the scale on the device
state which range the blood pressure measured is in.
If the systole and diastole values are in two different ranges
(i.e. systole is „high, normal“ and diastole is „normal“) the
graphic categorisation on the device will always show the
higher range i.e. in the above example this would be „high,
normal“.
Saving, requesting and deleting
measurements
The results of each successful measurement are saved
together with the date and time. If there are over 30 meas-
urement values, the oldest measurement value will be over-
written.
Press the SET button
6
. Press the function buttons -/+
7
to select the desired user memory ... . Confirm
your choice using the START / STOP button
8
.
Press the memory button M
5
to display the average
value „A“ of all saved measurements pertaining to the
user memory. Press the memory button M
5
again to
display the average value of the last 7 days for the
morning measurement. (Morning: 5.00 am – 9.00 am,
display „AM“). Press the memory button M
5
again
to display the average value of the last 7 days for the
evening measurement. (Evening: 6 pm – 8 pm, display
„PM“). By pressing the memory button M again, the
last individual measurement will be displayed with the
date and time.
Summary of Contents for 297903
Page 3: ...C D B 12 13 14 16 17 18 15 19 20 22 21 A 1 7 2 3 4 5 6 8 9 10 11 ...
Page 4: ...E F G H I J ...
Page 36: ...36 ...
