GB
│
IE
│
NI
│
CY
│
13
■
SEMK 105 A1
Malfunction
Cause
Remedy
The "Ice full"
lamp lights
up .
The ice basket is full .
Remove some ice cubes from the ice
basket .
The infra red sensors above
the ice basket are dirty .
Clean the infra red sensors with a soft
cloth .
The infrared sensors
above the ice basket
are defective .
Contact the Customer Service
department .
The "Add water"
lamp and
the "Ice full" lamp
light up .
The ice cube tray in the
rear part of the appliance is
blocked .
♦
Check whether the ice cube tray
is blocked, e .g . by an ice cube,
and remove the blockage .
♦
Pull the plug from the mains
socket and plug it back in again,
then restart the appliance .
No ice cubes are
produced .
The water or ambient temper-
ature is too high .
♦
Make sure that the ambient tem-
perature is no higher than 32°C .
♦
Make sure that the water used is
between 8 and 25°C .
The cooling system is leaky .
Contact the Customer Service
department .
The cooling system is
blocked .
Contact the Customer Service
department .
The ice cubes
produced are too
small .
Poor heat dissipation .
Set up the appliance so that it has a
free space of around 20 cm on all
sides .
The water temperature is too
high .
Make sure that the water used is
between 8 and 25°C .
The ambient temperature is
too high .
Make sure that the ambient
temperature is between 10 and
32°C .
Summary of Contents for 296909
Page 3: ...A B C ...