DE
│
AT
│
CH
│
41
■
SEMK 105 A1
Bedienung und Betrieb
Gerät befüllen
ACHTUNG - SACHSCHADEN!
►
Füllen Sie kein heißes Wasser in den Wasserbehälter ! Das Wasser sollte
eine Temperatur zwischen 8 und 25 °C haben .
HINWEIS
►
Bevor Sie das Gerät befüllen, stellen Sie sicher, dass die Verschlusskappe
fest in der Abflussöffnung auf der Geräteunterseite sitzt . Andernfalls
läuft das eingefüllte Wasser gleich wieder heraus .
♦
Öffnen Sie den Deckel und nehmen Sie den Eiswürfelkorb heraus .
♦
Füllen Sie, zum Beispiel mit Hilfe eines Messbechers, Trinkwasser in den
Wasserbehälter . Überschreiten Sie dabei nicht die MAX-Markierung .
♦
Setzen Sie den Eiswürfelkorb wieder in das Gerät ein und schließen Sie
den Deckel .
Eisproduktion starten
WARNUNG
►
Nutzen Sie stets frisches Trinkwasser für die Eiswürfelzubereitung . Nicht das
Wasser von aufgetauten Eiswürfeln wiederverwenden!
♦
Drücken Sie die
-Taste , um die Eisproduktion zu beginnen .
Die Kontrollleuchte leuchtet durchgehend grün .
♦
Nach ca . 7 - 15 Minuten, abhängig von der Wasser- und Umgebungstem-
peratur, hören Sie, dass Eiswürfel in den Eiswürfelkorb fallen .
Um Eiswürfel zu entnehmen, öffnen Sie den Deckel und entnehmen Sie
die gewünschte Menge Eiswürfel mit der Eisschaufel . Schließen Sie den
Deckel danach wieder .
♦
Wenn die Leuchte „ice full“
rot leuchtet, ist der Eiswürfelkorb voll .
Die Eiswürfelproduktion wird angehalten, das Gerät hört auf zu kühlen .
Sobald Sie ausreichend Eiswürfel entnommen haben, führt das Gerät die
Produktion automatisch fort .
♦
Wenn die Leuchte „add water“ rot leuchtet, ist der Wasserstand zu
weit abgesunken . Die Eiswürfelproduktion wird dann angehalten, das Gerät
hört auf zu kühlen . Wenn Sie weitere Eiswürfel produzieren wollen, füllen
Sie den Wasserbehälter , wie in „Gerät befüllen“ beschrieben, auf .
Summary of Contents for 296909
Page 3: ...A B C ...