■
22
│
GB
│
IE
SKV 1200 B2
3) To use the lid
9
, place it on the part of the
housing which surrounds the attachment tool
socket
7
in such a way that the filling opening
is facing you . On the attachment tool socket
7
there is a locking device for the lid
9
:
AttENtION! PrOPErty dAmAgE!
►
Never apply any pressure to the lid
9
when
attaching and removing it in order to ensure
that it is not damaged .
4) Depending on what you want to do, fit the
kneading hook
0
, whisk
q
or beater
w
into
the attachment tool socket
7
:
–
Insert the kneading hook
0
, whisk
q
or
beater
w
into the socket
7
so that the two
metal pins on the axle of the attachment
0
q
w
lock into the recesses of the attach-
ment tool socket
7
.
–
Press the attachment
0
q
w
as far as it
will go into the socket
7
and then turn it
anticlockwise as far as it will go (in the
direction of the arrow ) .
–
Let go of the attachment
0
q
w
. This is now
firmly held in the attachment tool socket
7
.
5) Add the ingredients you wish to process into
the mixing bowl
6
.
NOtE
►
Please note that during the kneading or stirring
process, the dough in the mixing bowl
6
increases in volume or is pressed upward
slightly as a result of the movement . You
should therefore never fill the mixing bowl
6
right up to the top!
Warning! Danger of crushing! Make sure
that no parts of the body are located
under the swivel arm
1
when you push it
downwards .
6) Press down the release lever
2
and press the
swivel arm
1
with the attachment mounted
downwards into the working position until the
swivel arm
1
locks in place .
NOtE
►
If you wish, you can open the filling opening
8
on the lid
9
so that you can also fill in
ingredients during operation .
7) Turn the rotary switch
3
to the required level
(see the section “Speed settings”) .
After you have finished using your
appliance
1) Turn the appliance off using the rotary switch
3
(Position “0”) .
2) Press down the release lever
2
and move the
swivel arm
1
to the highest position .
3) Remove the attachment
0
q
w
from the
socket
7
by pressing the attachment
0
q
w
lightly against the socket
7
and turning it
clockwise at the same time (in the direction
of the arrow
) . Then you can remove the
attachment
0
q
w
.
4) If fitted: remove the lid
9
.
5) Remove the mixing bowl
6
by turning it anti-
clockwise and then pulling it upwards .
6) Clean the appliance (see section “Cleaning
and care”) .
IB_292161_SKV1200B2_LB8.indb 22
22.09.17 07:53
Summary of Contents for 292161
Page 3: ...A B ...
Page 4: ...C ...
