Silvercrest 282593, Operating Instructions Manual

Page: 13 / 35

SLTG 1100 A1
■ 10
│
GB
│
IE
│
NI
Crisping bread rolls
Never place bread rolls directly on the toaster, always use the bread roll rack .
1) Flip out the two feet of the bread roll rack so that they click into place (if
you have not already done so).
2) Place the bread roll rack onto the toasting slot so that the feet project into
the toasting slot.
3) Place the bread rolls onto the rack and start the toasting procedure.
Turn the browning control up to a maximum of level 5 .
4) The browning can, however, vary, depending on the composition and type
of bread roll.
NOTE
► After toasting, the rolls will be very hot.
5) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on.
6) When you are finished with the bread roll rack , you can fold it for space-
saving storage.
–
Wait until the bread roll rack has cooled down.
–
Remove it from the appliance and fold in the feet by pushing them
together a little and folding them in at the same time.
Crumb tray
Crumbs that fall from the bread during toasting are collected in the crumb tray
-
.
1) To empty crumbs from the crumb tray
-
, simply pull it out.
2) Tip out the crumbs.
3) Push the crumb tray
-
back into the toaster so that it clicks back into place.
Cleaning
RISK OF ELECTRIC SHOCK
► Disconnect the plug from the mains power socket before cleaning the
appliance.
Never immerse the appliance in water or other liquids!
Otherwise there is a risk of an electric shock.