11
GB
5. Charging
NOTES:
• Before first use (without cable), and for every charging
procedure afterwards, charge the hair and beard trim-
mer
|
5
for approx. 90 minutes.
• When the batteries are almost empty, the plug sym-
bol
|
9
flashes in red. The device can then only be used
for a short time without being connected to the electric-
ity supply.
1. Place the battery charger
|
11
on a level surface.
2. Connect the power unit
|
10
to the battery charger
|
11
.
3. Switch off the device with the on/off switch
|
7
if neces-
sary.
4. Insert the power unit
|
10
into a readily accessible wall
socket whose voltage matches the voltage stated on
the rating plate.
5. Put the hair and beard trimmer
|
5
into the battery
charger
|
11
.
6. The plug symbol
|
9
is lit red and the battery is
charged. When the battery is fully charged, the bat-
tery symbol
|
8
flashes in blue. When the battery is ful-
ly charged, the device can be used for approximately
60 minutes without being connected to the power sup-
ply.
__NAS281952_Haar_und_Bartschneider_5in1_B6.book Seite 11 Dienstag, 11. Oktober 2016 4:10 16
