SilverCrest SMRB 40 A1
English - 61
Optical in
Use this operating mode to play music from the optical digital input SPDIF (for example from a TV)
on your sound bar (A). The TV must have an optical digital output. You will need a Toslink cable
(not supplied) for this connection. Proceed as follows:
Connect a Toslink cable to the optical digital output of your TV.
Then connect the Toslink cable to the optical digital input (15) of your sound bar.
Start playing on the TV.
Select the SPDIF (optical input) source from the SilverCrest Smart-Audio app, on the remote
control or by pressing the Mode / Spotify button (2).
If necessary, you can set the desired volume using the volume adjustment buttons (3, 4), via
the SilverCrest Smart-Audio app, on the remote control or on your TV.
See the User Manual for your TV set.
Adjusting the volume
You can adjust the volume by using the SilverCrest Smart-Audio app or by pressing the
+
(4) or
-
(3) buttons on the sound bar.
For playback from an external audio source (AUX) you can also adjust the volume on the external
audio source.
When using a Bluetooth
®
connection, the volume cannot be adjusted with the SilverCrest Smart-
Audio app.
USB port
On the one hand, the USB port (10) can be used to connect a USB storage device to play the
saved music files in "Music player" mode. On the other hand, you can charge a device
(smartphone or tablet PC) connected to this port. You can still charge devices connected to the USB
port (10) when the sound bar is in standby mode. There is only no power to the USB port (10)
when the sound bar is switched off using the main power switch (17).
SUB OUT - to connect an active subwoofer
You can use the SUB OUT jack and a suitable Cinch/RCA cable (not supplied) to connect an
active subwoofer to the sound bar.
The volume and frequency settings for the subwoofer must be adjusted on the
subwoofer itself. See the operating instructions for your subwoofer.
