Silvercrest 102827, Operating Instructions Manual

Page: 10 / 102

7 SHBS 600 A1
GB
Description of the appliance
Figure A:
Cutting unit
2
Thinner attachment
3 Slide switch for the thinner attachment
4
Attachment points for cutting length attachment
5
Slide switch for cutting length adjustment with release button
6
On/off switch
7
Charging indicator lamp
8
Connection socket for mains adapter
9
Mains power adapter
10
Cutting length attachment (4/7/10/13/16 mm)
11
Cutting length attachment (18/21/ 24/27/30 mm)
Before fi rst use
The hair and beard trimmer can be used as a battery-powered or mains-powered
appliance.
Charging the batteries
The battery for the hair and beard trimmer should be charged for at least
90 minutes before fi rst use.
♦ Plug the cable plug of the mains power adapter
9
into the socket
8
on the
underside of the hair and beard trimmer.
♦ Avoid damaging the appliance! Ensure that the appliance is switched off before
charging the battery.
♦ Plug the mains power adapter
9
(wide-range voltage 100–240 V) into a
power socket complying with the appliance specifi cations.
♦ The charging progress is indicated by the charging indicator lamp
7
.
–
Charging indicator lamp fl ashes red: battery is being charged
–
Charging indicator lamp lights up red: the battery is discharged
–
Charging indicator lamp fl ashes green: appliance is connected to the
mains power adapter
9
and charged.
–
Charging indicator lamp light up green: battery is fully charged
♦ Once the battery is fully charged, you can use the appliance for around
60 minutes without connecting it to the power supply.
IB_102827_SHBS600A1_LB4.indb 7 23.10.14 13:37